Brazilian Cherry(imported)
- Jatoba Hymenaea courbaril
Wood Floor Appearance
Color: Sapwood is gray-white; heartwood is salmon red to orange-brown when fresh, and becomes russet or reddish brown when seasoned; often marked with dark streaks.
Grain: Mostly interlocked; texture is medium to rather coarse.
Variations Within Species And Grades: Moderate to high color variation.
Properties
Hardness/Janka:
Janka:2820; 119% harder than Northern red oak.
Dimensional Stability: Average (8.5; 1% more stable than Northern red oak). However, actual installations have shown significant movement. Longer-than-normal acclimation time is recommended.
Durability:
Workability
Sawing/Machining: Sawing is difficult due to high density; requires frequent resharpening of tools. Planing is difficult due to interlocked grain. Can be machined to a smooth surface. Carbide tooling recommended.
Sanding: Scratches are easily seen. Each sanding must carefully remove the scratches from the previous cut, or sanding marks will be visible in the finish.
Nailing: Due to hardness it is very important that the angle of penetration be adjusted carefully. If using a pneumatic nailer, the air pressure should be adjusted.
Finishing: Coating with oil-modified polyurethane may occasionally cause white spots or specks, as well as white end joints, to appear. This may be avoided by buffing in a clear oil sealer or neutral stain, then buffing on satin polyurethane.
Comments:
Origin: South America
Availability
Easily available.
Content may not be reproduced, downloaded, published, or transferred in any form or by any mean, except with prior written permission of the National Wood Floor Association. We would like to thank the National Wood Floor Association for the use of their content on woodfloorexpo.com
